[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Fw: Comfort sending RS232 commands - any success ?
- Subject: Fw: Comfort sending RS232 commands - any success
?
- From: Gareth Cook <g@xxxxxxxxxx>
- Date: Sun, 28 Jan 2007 23:15:26 +0000
Well frig me sideways
I was convinced it wasnt that cause I was using a straight thru from the
pc !
Got cbus switch to now turn on/off the plasma..now for some logic !
G.
Gareth Cook
IT Architect / Project Manager, SWG Sales
IBM SWG Sales - Lotus Park, Staines, TW18 3AG
Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
email: g@xxxxxxx
----- Forwarded by Gareth Cook/UK/IBM on 28/01/2007 23:06 -----
Discussion
Main Topic
ukha_d@xxxxxxx
Today 20:53
.
Subject:
.
Re: [ukha_d] Comfort sending RS232 commands - any success ?
.
Category:
Hi Gareth
Have you tried swapping pins 2 + 3 (tx and rx) ...???
HTH
Frank
----- Original Message -----
From: "Gareth Cook" <g@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, January 29, 2007 7:14 AM
Subject: [ukha_d] Comfort sending RS232 commands - any success ?
> Guys
>
> Im trying to get a Comfort UCM to send some commands to the plasma
screen
> - 02H then POF then 03H
>
> I can plug the cable in the pc and talk to the ucm ok, and i can plug
the
> cable from the pc to the plasma ok - i found a program to send these
> commands for me (i didnt have much success sending them manually)
>
> So assuming the serial cable is all ok to the plasma from the ucm,
> something is going wrong ! Type of thing that drives you nuts !
>
> ?
>
> Ta
>
> G.
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|