Re: Comfort sending RS232 commands - any success ?

["Frank Mc Alinden" <frankmc@xxxxxxxxxxxxxxxx>]

Hi Gareth

> I was convinced it wasnt that cause I was using a straight thru from
the
> pc !

;-)

I keep a null modem cable handy for moments like this ;-).....

Frank



----- Original Message -----
From: "Gareth Cook" <g@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, January 29, 2007 10:15 AM
Subject: Fw: [ukha_d] Comfort sending RS232 commands - any success ?


> Well frig me sideways
>
> I was convinced it wasnt that cause I was using a straight thru from
the
> pc !
>
> Got cbus switch to now turn on/off the plasma..now for some logic !
>
> G.
>
> Gareth Cook
> IT Architect / Project Manager, SWG Sales
> IBM SWG Sales - Lotus Park, Staines, TW18 3AG
> Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
> email: g@xxxxxxx
>
>
> ----- Forwarded by Gareth Cook/UK/IBM on 28/01/2007 23:06 -----
>
> Discussion
> Main Topic
>
> ukha_d@xxxxxxx
> Today 20:53
>
> .
> Subject:
> .
> Re: [ukha_d] Comfort sending RS232 commands - any success ?
> .
> Category:
>
>
>
> Hi Gareth
>
> Have you tried swapping pins 2 + 3  (tx and rx) ...???
>
> HTH
> Frank
>
> ----- Original Message -----
> From: "Gareth Cook" <g@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Monday, January 29, 2007 7:14 AM
> Subject: [ukha_d] Comfort sending RS232 commands - any success ?
>
>
>> Guys
>>
>> Im trying to get a Comfort UCM to send some commands to the plasma
> screen
>> - 02H then POF then 03H
>>
>> I can plug the cable in the pc and talk to the ucm ok, and i can
plug
> the
>> cable from the pc to the plasma ok - i found a program to send
these
>> commands for me (i didnt have much success sending them manually)
>>
>> So assuming the serial cable is all ok to the plasma from the ucm,
>> something is going wrong ! Type of thing that drives you nuts !
>>
>> ?
>>
>> Ta
>>
>> G.
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>