The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Fw: Comfort sending RS232 commands - any success ?


  • Subject: Fw: Comfort sending RS232 commands - any success ?
  • From: Gareth Cook <g@xxxxxxxxxx>
  • Date: Sun, 28 Jan 2007 22:45:11 +0000

I had been using a straight serial cable to connect the pc to the
plasma
to test.

I'll see if i can trap the commands via hyperterminal

G.

Gareth Cook
IT Architect / Project Manager, SWG Sales
IBM SWG Sales - Lotus Park, Staines, TW18 3AG
Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
email: g@xxxxxxx


----- Forwarded by Gareth Cook/UK/IBM on 28/01/2007 22:30 -----

Discussion
Main Topic

ukha_d@xxxxxxx
Today 20:53

.
Subject:
.
Re: [ukha_d] Comfort sending RS232 commands - any success ?
.
Category:



Hi Gareth

Have you tried swapping pins 2 + 3  (tx and rx) ...???

HTH
Frank

----- Original Message -----
From: "Gareth Cook" <g@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, January 29, 2007 7:14 AM
Subject: [ukha_d] Comfort sending RS232 commands - any success ?


> Guys
>
> Im trying to get a Comfort UCM to send some commands to the plasma
screen
> - 02H then POF then 03H
>
> I can plug the cable in the pc and talk to the ucm ok, and i can plug
the
> cable from the pc to the plasma ok - i found a program to send these
> commands for me (i didnt have much success sending them manually)
>
> So assuming the serial cable is all ok to the plasma from the ucm,
> something is going wrong ! Type of thing that drives you nuts !
>
> ?
>
> Ta
>
> G.
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>







[Non-text portions of this message have been removed]




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.