The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: LW10G has blown up


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: LW10G has blown up
  • From: "Nikola Kasic" <nikola@xxxxxxx>
  • Date: Mon, 18 Mar 2002 11:20:23 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I have normal light bulbs, 60W, so shouldn't be a problem.
Nik
-----Original Message-----
From: Stainton-James, Mark (London) [mailto:stainmar@xxxxxxx]
Sent: 18 March 2002 11:22
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] LW10G has blown up

The only time I have had problems with LW10's is when I had them connected to Halogen lights.  The LW10 would work fine for a few days then the fuse would blow. Like most people I have had no real reliability problems with them.


Mark

 

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 18 March 2002 10:59
To: Home automation (E-mail)
Subject: [ukha_d] LW10G has blown up

 

Hi,

My home automation didn't start well. I replaced, for a start, two wall switches with dimmers LW10G from Laser, one in bedroom and the other in living room. I also have TM13U and HR10 for remote controling via RF. Everything worked fine for a while, but a couple of days ago, something sparked indide dimmer when I tried to switch the light in bedroom. I checked, and the fuse was blown. Then I bought a new fuses, but as soon as I replaced it, the circuit fuse went off. I took the LW10 out and I found big black smelly patch on the CCB and, what looks to me like some transistor melted. It is not a nice experience when fuse blows under your fingers.

Unfortunatelly, my SWMBO was present when it happened and now she is afraid using her bedside lamp in fear that it will explode (I plugged it into Lamp Module).

I hope that Li will replace it without problems, but I would like to know why it happened. Few people told me on this group that they are using lots of LW10s and that they are very reliable, but I have just two, and one blew up after two weeks.

I plan to order few more, but I would like to know what I'm putting myself into. I cannot afford many more incidents like this, because SWMBO's current attitude regarding home automation is not very positive at the moment.

I have UPS installed in my node 0. I noticed that 50% of the time (maybe even more), it cuts voltage, so voltage must be higher than normal. I don't know if that can be related.

Nik

 



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.