[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Control of heating (X10/Comfort/HV etc)
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Control of heating (X10/Comfort/HV etc)
- From: "Kenneth Watt" <kennwatt@xxxxxxx>
- Date: Thu, 28 Feb 2002 19:59:46 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>
> Re sensing if the boiler is on...
>
> Try taping a reed switch to the side of the gas valve if it is
solenoid
> actuated. With some types of solenoid operated valves there is enough
> magnetic field on the outside to close a reed switch. I would be a bit
> worried about connecting any circuit directly to the valve, as any
> accidental voltage feed to the valve could turn it on --- BANG!
>
[Kenneth Watt]
BANG plan...not good! ;-)
K.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Home |
Main Index |
Thread Index
|