The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Cat 5 Pinouts



Safety from BT is easy because you can only ever physically use a max of 6
wires, though only 2/3 are actually needed.  Safety from blowing up your
hub
is more problematic as I think all 8 are wired, though only 4 used.
Besides, when you get Keiths Krazy Kat5 modules, switch etc (as u
inevitably
will) then all 8 lines will DEFINITELY be used, so the short answer is:
Don't mix them up! :)

Tony

> -----Original Message-----
> From: Robert Chasmer [mailto:robert.chasmer@xxxxxxx]
> Sent: 14 February 2002 16:17
> To: 'ukha_d@xxxxxxx'
> Subject: [ukha_d] Cat 5 Pinouts
>
>
> Could anyone recommend a safe RJ45 pinout to use for distributing 12v.
> Basically I want to connect Nigel's IR circuit up via my
> patch pannel, which
> means I need 3 wires:-
> 1) +12v
> 2) 0v
> 3) Signal
>
> I want to avoid any problems if I accidently patched the IR
> box to either my
> Hub or Telephone points.
>
> I've found a number of guides describing what is used for a
> network and even
> a BT patch:-
> * http://www.cpe.surrey.ac.uk/support/utp.htm
>
> * http://www.rogerssystems.com/store/tech/how-to-cat5.cfm
>
> *
> http://www.bluemax.net/techtips/networking/Wiring_Tips/Wiring1
> 00TX/colorcode
> standards.htm
>
> Based on these I think the following pins are used (please correct me)
> (1) Network(Tx+)
> (2) Network(Tx-)
> (3) Network(Rx+)
> (4) BT(Line-A)
> (5) BT(Line-B)
> (6) Network(Rx-), BT(Bell)
> (7)
> (8)
>
> This leaves me to believe I could use pins 7 & 8 safely, but
> I need one
> more.  I wired up my patch pannel for the phone about a year
> ago, so I can't
> remember what pins I used but I'll check when I get home.
>
> Any ideas?
>
> Also I want to buy some RJ45 / Cat 5 sockets to fit neatly in
> some small
> boxes I'm put the IR boards in.   Anyone know if maplins sell
> small Cat 5
> sockets that I could mount in a small box.
>
>
> Rob
> --
>      ______   __   _   ______   ______
>     / ___   / /  /  / __    / _____ HOME: chas@xxxxxxx
>    / /  /_/ / /__/ / / /__/ / / /__    http://www.kaosuk.co.uk/
>   / /  __  / ___  / / ___  /  \__  \            ----
>  / /__/ / / /  / / / /  / / _____/ / Rob Chasmer, MMT Computing
> ______/ _/  /_/ _/  /_/ ______/ robert.chasmer@xxxxxxx
>
> This email and any files transmitted with it are confidential
> and intended
> solely for the use of the individual or entity to whom they
> are addressed.
> If you have received this email in error please let us know
> by e-mail reply
> and delete it from your system; you may not copy this message
> or disclose
> its contents to anyone.  Please note that any views or
> opinions presented in
> this email are solely those of the author and do not
> necessarily represent
> those of MMT Computing plc.  Finally, the recipient should
> check this email
> and any attachments for the presence of viruses.  MMT
> Computing plc accepts
> no liability for any damage caused by any virus transmitted
> by this email.
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Get your FREE credit report with a FREE CreditCheck
> Monitoring Service trial
> http://us.click.yahoo.com/ACHqaB/bQ8CAA/ySSFAA/IBOolB/TM
> --------------------------------------------------------------
> -------~->
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.