The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: X10 addressing


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: X10 addressing
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Mon, 4 Feb 2002 11:11:07 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


> >I use a house code per room but if I did it again would
> probably try to
> >add
> using a single
> >housecode for all ceiling lights.
>
> How would that be an advantage?
> Can't u just run around & change all the codes as Ian Lowe
suggested?

Then you can use a single X10 controller to do all the lights rather
than using an all housecode one and a Pronto...

> Ah yes, I can see it might be a problem.  Don't the appliance
> modules use the same relays then?

I think they do but the TM12 just seems louder for some reason ... I can
hear the appliance module for the TV in the spare bedroom switch on from
downstairs so they all do it ... Especially if you have plasterboard
walls!

> What a waste :(

Not really ... The idea is you use it as a pass through for the PC.

> Mine gets quite warm - is this normal?

Mine did too so I assume yes.

Phil



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.