[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
[Development] Measure TRIAC temp
- To: ukha_d@xxxxxxx
- Subject: [Development] Measure TRIAC temp
- From: "Dr John Tankard" <john@xxxxxxx>
- Date: Mon, 18 Jun 2001 10:43:57 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Keith,
1 rabbit -> 1 Pic -> several triacs
It looks as though I might have some spare pins so i was thinking...
what about mounting a 1 wire temp sensor on the heat sink and running
a short 1 wire bus though the triac boards. I could then shutdown a
channel which may be overloaded ? I am sure I will have enough code
space to knock up a 1 wire interface.
As I see it one problem might be the risk of a non isolated part on
the triac card, what do you think is this a bit of an OTT idea ?
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|