The codes should be learned the same
way
when connected or not to the PC but I found out the hard way that this is
not
always the case, my problem was with a Yamaha
remote
for the AX1! Pronto connected with Pronto Edit just would not learn them
properly but when I tried Pronto on it’s own it was fine, so long as
the
remote was at least five inches or so away from the receive window on the
Pronto.
K.
-----Original
Message-----
From: Matt Kummell
[mailto:kummell@xxxxxxx]
Sent: 05
August
2001
11:55
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Pronto
and
Toshiba SD-100E DVD Player
Thanks, Kenneth. I’ve been using the service
menu
when the remote’s been disconnected from the computer. I’ve even tried it in
different
rooms thinking there might be some interference! The Pronto seems to be capturing the
codes alright, or so it says…. I’ve “googled
around” a
bit for Toshiba and Pronto but I haven’t found much… as an aside, when I like to my
computer,
is it just copying the page layouts or are the actual learned codes being
stored on my machine in ProntoEdit?
Thanks
again,
Matt
-----Original
Message-----
From: Kenneth Watt
[mailto:kennethwatt@xxxxxxx]
Sent: 05
August
2001
11:39
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Pronto
and
Toshiba SD-100E DVD Player
Matt,
How
are
you getting the codes into the Pronto?
If,
as I
suspect, you are doing it while the Pronto is connected to the PC sometimes
the
Pronto is not so good at learning codes that way and you may have to use
the
service menu on the Pronto when it is not connected to get your IR
functions
learned. That is of course if the codes can be
learned!
HTH
K.
-----Original
Message-----
From: Matt Kummell
[mailto:kummell@xxxxxxx]
Sent: 05
August
2001
11:31
To: ukha_d@xxxxxxx
Subject: [ukha_d] Pronto and
Toshiba SD-100E DVD Player
“lookee
here Mr Pronto Remote, I’m gonna learn you some remote control
codes!”
a
bit of a problem – I’m recording in the remote codes from my
Toshiba DVD remote control, the Pronto says “yup, I’ve recorded
them alright” but the codes ain’t workin’ from the
Pronto...
any
ideas? Anyone successfully
recorded
the buttons from Toshiba?
Thanks!
Matt
____________________________________
Automated Home
UK
http://www.automatedhome.co.uk
____________________________________
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the
Yahoo! Terms of
Service.
____________________________________
Automated Home
UK
http://www.automatedhome.co.uk
____________________________________
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use
of
Yahoo! Groups is subject to the Yahoo!
Terms of Service.
____________________________________
Automated Home
UK
http://www.automatedhome.co.uk
____________________________________
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the
Yahoo! Terms of
Service.