The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Free DVD?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Pronto and Toshiba SD-100E DVD Player


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Pronto and Toshiba SD-100E DVD Player
  • From: "Matt Kummell" <kummell@xxxxxxx>
  • Date: Sun, 5 Aug 2001 11:55:14 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks, Kenneth.  I’ve been using the service menu when the remote’s been disconnected from the computer.  I’ve even tried it in different rooms thinking there might be some interference!  The Pronto seems to be capturing the codes alright, or so it says…. I’ve “googled around” a bit for Toshiba and Pronto but I haven’t found much…  as an aside, when I like to my computer, is it just copying the page layouts or are the actual learned codes being stored on my machine in ProntoEdit?

 

Thanks again,

 

Matt

 

-----Original Message-----
From: Kenneth Watt [mailto:kennethwatt@xxxxxxx]
Sent: 05 August 2001 11:39
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] Pronto and Toshiba SD-100E DVD Player

 

Matt,

 

How are you getting the codes into the Pronto?

 

If, as I suspect, you are doing it while the Pronto is connected to the PC sometimes the Pronto is not so good at learning codes that way and you may have to use the service menu on the Pronto when it is not connected to get your IR functions learned. That is of course if the codes can be learned!

 

HTH

 

K.

 

-----Original Message-----
From: Matt Kummell [mailto:kummell@xxxxxxx]
Sent:
05 August 2001 11:31
To: ukha_d@xxxxxxx Subject: [ukha_d] Pronto and Toshiba SD-100E DVD Player

 

“lookee here Mr Pronto Remote, I’m gonna learn you some remote control codes!”

 

a bit of a problem – I’m recording in the remote codes from my Toshiba DVD remote control, the Pronto says “yup, I’ve recorded them alright” but the codes ain’t workin’ from the Pronto...

 

any ideas?  Anyone successfully recorded the buttons from Toshiba?

 

Thanks!

 

Matt




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.





____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



Yahoo! Groups Sponsor


____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.