The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: colour camera with mic at b&q


  • To: ukha_d@xxxxxxx
  • Subject: Re: colour camera with mic at b&q
  • From: Nigel Orr <Nigel.Orr@xxxxxxx>
  • Date: Fri, 01 Sep 2000 09:14:33 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • References: <001101c012d6$ac7abc80$4867fea9@csm> <003201c01274$02ef08e0$0101a8c0@mark> <4.3.1.0.20000830124648.00afc460@xxxxxxx> <4.3.1.0.20000830140357.00b1a380@xxxxxxx> <4.3.1.0.20000830160816.00b33e70@xxxxxxx> <002d01c012a0$4b3362a0$0101a8c0@mark> <4.3.1.0.20000831114506.00b33730@xxxxxxx>
  • Reply-to: ukha_d@xxxxxxx

-------------------------- eGroups Sponsor -------------------------~-~>
Open the door to endless possibilities for your home!
http://click.egroups.com/1/7726/9/_/2065/_/967796232/
---------------------------------------------------------------------_->

At 23:39 31/08/00 +0100, you wrote:
>I now have it mounted and the video/audio through two relays in
comfort(on
>the normally closed circuit), works fine.

Congratulations!  I've just about finished my video switching for 2 cameras
for now.  It's not very beautiful (I've just soldered cat-5 pairs onto
relay terminals and have them dangling in the air between Krone blocks!),
but it's working really well.

Like you, the only thing I have remaining to do is switch the video/cctv so
that video out from the VCR normally goes round the house, and it switches
to cctv when someone comes to the door or comfort is in night or away mode,
once I get a UCM, it can signal the pc too, so it can start motion
detection as needed.

I've used the 12V supply that came with the camera as a Comfort auxiliary
supply, so it powers the cameras and the camera switching relays- I might
be getting close to capacity on Comfort's supply otherwise...

Nigel






Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.