Re: colour camera with mic at b&q

["Campbell" <c.macd@xxxxxxx>]

Solder,

What's that... I am playing about so much, some of the wires are wrapped
and
taped.Ready to order cat  5 and rj11 sockets from let automate, then it
will
be fixed properly. I've run out of relays and need more to handle the dvd
and pc to cctv switching for audio, video is already switched.

Motion detection through the UCM ...tell me more. (is it
homewatcher/webcam). I am interested in the UCM but have to convince my
good
wife of the necessity, after paying for the sockets and cabling...

At the moment just trying to get a doorbell zone on comfort to identically
copy a doorstation press...

And my good wife is still waiting on some painting to be done. Its more fun
playing with wires.

Campbell



----- Original Message -----
From: "Nigel Orr" <Nigel.Orr@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, September 01, 2000 9:14 AM
Subject: Re: [ukha_d] colour camera with mic at b&q


>
> At 23:39 31/08/00 +0100, you wrote:
> >I now have it mounted and the video/audio through two relays in
comfort(on
> >the normally closed circuit), works fine.
>
> Congratulations!  I've just about finished my video switching for 2
cameras
> for now.  It's not very beautiful (I've just soldered cat-5 pairs onto
> relay terminals and have them dangling in the air between Krone
blocks!),
> but it's working really well.
>
> Like you, the only thing I have remaining to do is switch the
video/cctv
so
> that video out from the VCR normally goes round the house, and it
switches
> to cctv when someone comes to the door or comfort is in night or away
mode,
> once I get a UCM, it can signal the pc too, so it can start motion
> detection as needed.
>
> I've used the 12V supply that came with the camera as a Comfort
auxiliary
> supply, so it powers the cameras and the camera switching relays- I
might
> be getting close to capacity on Comfort's supply otherwise...
>
> Nigel
>
>
>
>
>