[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: X-10 110V mods.
> 2) In trying to float loose the US Power Pins, I put down >far<
too
> much heat onto the board, and flambed the X-10 chip.
On the modules i did - i sucked up the large blob of solder on the pins
then
bent in the pin end which had been widened to secure it. The re-heat and
pull the pins out.
I think it unlikely to have damaged the chip by heat unless of course you
used a blowtorch!
Have you checked that you have a reasonble supply voltage to the power pins
on the chip ?
Steve.
-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/9/_/2065/_/972379454/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|