[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: IR Transmitter
- To: ukha_d@xxxxxxx
- Subject: RE: IR Transmitter
- From: nigel@xxxxxxx
- Date: Wed, 22 Nov 2000 21:36:34 -0000 (GMT)
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
BTW, could some of the regulars drop me a line if this appears on the
list... I'm not seeing my postings, is anyone else?
On 22-Nov-2000 rj@xxxxxxx wrote:
> the TSOP or similar today, but New Zealand tends to be about 10
> years behind
You might be lucky then- it's just recently been discontinued here-
it might be a new part with you!
> the world with things like this. one more thing.. what voltage is
> the 680R
> resistor??
Doesn't matter, it will dissipate <500mW, a 1/4 W resistor should do
at a pinch (it's not on all the time)
> and can the 2k resistor on the receiver board be replaced with
> either a 1.8
> or 2.2k???
Either should be fine- none of the components are particularly
critical, though the 2 resistors and capacitor around pins 6 and 7
will affect the modulation frequency, so you might have reduced range
if they are too far out of tolerance.
Nigel
-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/3/_/2065/_/974930606/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|