[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Heyu and RFXrec



On Friday, July 31, 2015 at 1:58:47 PM UTC-6, fear...@xxxxxxxxxxxxx wrote:
> I am trying to get Heyu Working on Raspberry Pi with an RFXrec unit to receive weather from Oregon Scientific sensors....it's almost working...but heyu monitor isn't displaying any data.
>
> I would post this to the Heyu Users group, but they haven't approved me to join yet.
>
> Here is my setup:
>    RFX is on /dev/ttyUSB0 (according to dmesg)
>    Permissions on the device are good
>    x10config:
>       TTY dummy
>       TTY_AUX /dev/ttyUSB0 RFXCOM
> I then run:
>    heyu start
> And I see the process running:
>    pi  8028  0.0  0.3   2688  1704 ttyUSB0  Ss+  13:37   0:00 heyu_relay t
>
> Nothing is received when I run "heyu monitor"
>
> The RFX LED blinks when the Oregon Scientific (OS) transmits, so RFX is receiving signal.
>
> I tried the following for giggles (I know the configuration below is wrong, but it tells me heyu is compiled and generally working on my system:
>    x10config:
>       TTY  /dev/ttyUSB0
> When I run heyu monitor, I now get:
>    Poll received unknown value (1 bytes), leading byte = 14
>    Poll received unknown value (2 bytes), leading byte = ff
>    Poll received unknown value (1 bytes), leading byte = fe
>    etc....
> These are received every time the OS sensor transmits....telling me heyu is working, it's just configured wrong.....but it doesn't receive anything at all when I use TTY dummy, etc in the config file
>
> Anyone have any pointers?  Is there something I am missing?
> Any help would be greatly appreciated.
>
> Thanks,
> -Owen

Correction, when I run "heyu start", the following processes are running:
   pi  8166  0.0  0.3  2688  1352 ?        Ss   14:16   0:00 heyu_relay
   pi  8167  0.0  0.3  2692  1484 ttyUSB0  Ss+  14:16   0:00 heyu_aux t



comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home