Re: Strange behaviour

[dlh <nobody@xxxxxxxxxxx>]

You need to provide us with more information. Specifically, what are the
IF/THEN statements in your software?

The RR501 receives RF and automatically sends it as PLC if it is for the
RR501's housecode.

The CM11A only receives PLC (or via RS232) so it can only be acting on
the PLC codes sent by the RR501.

My guess is that the CM11A (& lamp modules) and RR501 are on different
phases and that you either need to put everything on the same phase or
add a phase coupler.

On Mon, 21 Jul 2008 13:13:29 -0500, Gene wrote:

> Using my wireless remotes [KC674 or HR12A] I can control the living room
> and family room lamps [on/off only] utilizing a RR501 and CM11A by
> setting up an IF/THEN statement in my software. I can even control the
> modules manually by click on their icons in the software.
>
> However turning the computer off and using only the remotes I can't
> control the lights by sending their lamp module house/unit codes. I have
> made sure the RR501, remotes and lamp modules are set to the same codes.
> Shouldn't the RR501 receive the RF remotes signal and transmit directly
> to the lamps modules?