[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: x10 switch problem?

Subject: Re: x10 switch problem?
From: "bruceR" <brobin111@xxxxxxxxxxx>
Date: Sat, 9 Feb 2008 20:58:10 -0600
Newsgroups: comp.home.automation
References: <pan.2008.02.09.23.03.32@xxxxxxxxxxx><PsWdnRkS5PXwoDPanZ2dnUVZ_gSdnZ2d@xxxxxxxxxxx> <pan.2008.02.10.01.07.53@xxxxxxxxxxx>

Amadeus W.M. wrote:
> On Sat, 09 Feb 2008 17:54:49 -0600, bruceR wrote:
>
>
>> If you inspect the switch I suspect that you'll find an admonishment
>> like "For Incandescent Use Only" so you'll have to replace it or the
>> bulb.
>
> Would I have the same problem if I replaced the switch with an X10
> switch? Does x10 work at all with fluorescent lights?

You'll need to use the "Appliance" model with the relay inside.

References:
- x10 switch problem?
  - From: Amadeus W.M.
- Re: x10 switch problem?
  - From: bruceR
- Re: x10 switch problem?
  - From: Amadeus W.M.

Prev by Message: Re: Home Automation - High-Style - Seamless Integration
Next by Message: Re: Keypad only - no electronics
Previous by thread: Re: x10 switch problem?
Next by thread: Converting An Existing X10 System To Work With CFLs
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home