[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: x10 switch problem?

Subject: Re: x10 switch problem?
From: "Amadeus W.M." <amadeus84@xxxxxxxxxxx>
Date: Sun, 10 Feb 2008 01:07:53 GMT
Newsgroups: comp.home.automation
References: <pan.2008.02.09.23.03.32@xxxxxxxxxxx> <PsWdnRkS5PXwoDPanZ2dnUVZ_gSdnZ2d@xxxxxxxxxxx>

On Sat, 09 Feb 2008 17:54:49 -0600, bruceR wrote:

> If you inspect the switch I suspect that you'll find an admonishment
> like "For Incandescent Use Only" so you'll have to replace it or the
> bulb.

Would I have the same problem if I replaced the switch with an X10
switch? Does x10 work at all with fluorescent lights?

Follow-Ups:
- Re: x10 switch problem?
  - From: bruceR

References:
- x10 switch problem?
  - From: Amadeus W.M.
- Re: x10 switch problem?
  - From: bruceR

Prev by Message: Re: Open Source
Next by Message: Re: Open Source
Previous by thread: Re: x10 switch problem?
Next by thread: Re: x10 switch problem?
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home