[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Surveillance camera wiring

Subject: Re: Surveillance camera wiring
From: "Robert L Bass" <RobertLBass@xxxxxxxxxxx>
Date: Thu, 08 Nov 2007 06:31:38 GMT
Newsgroups: comp.home.automation
References: <1194115395.371882.27810@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1343779@xxxxxxxxxxxxxxxxxxx> <1194298194.016126.172600@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

> Should the modulation happen near the camera (ie. garage) or in my
> house?   In other words, it is better to have the signal travel as
> the video component or as an RF signal?

It's usually best (assuming you use a good quality camera) to keep
the signal as a composite video most of the way.  Decent cameras will
have an output that will travel farther with a better SNR than the RF
output of most modulators.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>

References:
- Surveillance camera wiring
  - From: betty
- Re: Surveillance camera wiring
  - From: Dan Lanciani
- Re: Surveillance camera wiring
  - From: betty

Prev by Message: Re: Xmas is early - with LED lights
Next by Message: TV pre-wire question.....
Previous by thread: Re: Surveillance camera wiring
Next by thread: Re: Cordless Listening Device
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home