[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 AGC and Insteon



Overlapping messages will be seen as invalid by both X-10 and Insteon
receivers so I think you have hit the sweet spot.

"Jeff Volp" <JeffVolp@xxxxxxx> wrote:

>In a system with both types of devices, my concern was to recover
>sensitivity quickly enough following an Insteon transmission so that a
>tailgating low-level X10 message could be detected.  Rather than averaging
>the signal level over many X10 windows, each cycle is now processed
>independently.  So sensitivity recovers immediately.  Overlapping messages
>will most likely be logged as a collision.


http://www.davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx


comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home