[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Hole Diameter for running cable

Subject: Re: Hole Diameter for running cable
From: "Robert Green" <ROBERT_GREEN1963@xxxxxxxxx>
Date: Tue, 28 Nov 2006 22:25:50 -0500
Newsgroups: comp.home.automation
References: <FbqdnZIyMIqeS_HYnZ2dnUVZ_u6dnZ2d@xxxxxxxxxxxx> <ekit3m$5im$1@xxxxxxxxxxxxxxxxx>

"E. Lee Dickinson" <lee@xxxxxxxxxxxxxxxxxxxxx> wrote in message

<stuff snipped>

> In vertical members, the hole can be located anywhere, but if it is closer
than
> 1/3 of the board height to the edge, you must use a nailing plate. I use
> them everywhere anyway.

Any photos of how you use the plates?

--
Bobby G.

Follow-Ups:
- Re: Hole Diameter for running cable
  - From: Robert L Bass

References:
- Hole Diameter for running cable
  - From: Kevin Gottsman
- Re: Hole Diameter for running cable
  - From: E. Lee Dickinson

Prev by Message: Re: Best way to make a camera rotate?
Next by Message: Re: Best way to make a camera rotate?
Previous by thread: Re: Hole Diameter for running cable
Next by thread: Re: Hole Diameter for running cable
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home