Re: CM11 Status Request (C# Language)

[nobody@xxxxxxxxxxxx (Dave Houston)]

"Quina" <carias.joao@xxxxxxxxx> wrote:

>The scenario is when the CM11 is working correctly and I turn on/off a
>device (I can do it several times with no problems) but after a while,
>without sending any further bytes to the control module,   the CM11
>starts to behave strangely and starts to send the 0xA5 byte (power off,
>clock set request) althoug the module was not umplugged from the power
>socket...

I've never seen that behavior. If sending 9B doesn't clear it, it sounds
like you may have a defective CM11. Have you tried sending the entire Set
RTC sequence?

http://davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx