[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: XTB - the Future of X10 has arrived!

Subject: Re: XTB - the Future of X10 has arrived!
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Mon, 29 May 2006 20:28:31 GMT
Newsgroups: comp.home.automation
References: <AJudnXpxSpn3y-fZRVn-tw@xxxxxxx> <1148929620.514624.287580@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <wtIeg.111584$Fs1.67798@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

"Jeff Volp" <JeffVolp@xxxxxxx> wrote:

>They work in different ways.  The Booster Link can be plugged in anywhere,
>and monitors the line for X10 traffic.  I understand it echoes any
>recognized X10 command during the repeat time slot.

BoosterLinc amplifies the signal in realtime and, in cases where the signal
is only for single/split phase, creates it for the other phases. Aside from
the latter feature, the difference is that your device has a higher output.

     http://www.smarthome.com/4827.html

References:
- XTB - the Future of X10 has arrived!
  - From: Robert Green
- Re: XTB - the Future of X10 has arrived!
  - From: Dennis
- Re: XTB - the Future of X10 has arrived!
  - From: Jeff Volp

Prev by Message: Re: replace XTAL with Crystal?
Next by Message: Re: Intermatic 5-pc. kit good?
Previous by thread: Re: XTB - the Future of X10 has arrived!
Next by thread: Frustrated locating special relay controlled outlet...
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home