[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Lamplinc lockups and base address loss!

Subject: Lamplinc lockups and base address loss!
From: onesandzeros <me@xxxxxxxx>
Date: Wed, 18 Jan 2006 19:40:40 -0500
Newsgroups: comp.home.automation

I have about 13 Lamplinc 2000STW3 modules, and after a power outage
(even a very short glitch in service)  at least half of the modules
lose thier base address or lock up with the attached lamp on at full
brightness and will not respond to PLC commands.  Anyone else
experiencing these instabilities after a power glitch? It is very
annoying and time consuming to reprogram the modules. I sent a email
to Smarthome tech support and hope for some resolve. I asked them if
the Lamplinc V2 modules are more stable after a power outage, and
would they exchange the 2000STW3 for V2's .

Follow-Ups:
- Re: Lamplinc lockups and base address loss!
  - From: Dave Houston
- Re: Lamplinc lockups and base address loss!
  - From: jmj1492

Prev by Message: Re: Detecting where a coax cable goes to
Next by Message: Re: Finishing basement, suggestion on RG6 cable needed
Previous by thread: Re: INFORMATION TO INCREASE SALES OR TRAFFIC TO YOUR WEBSITE/BUSINESS
Next by thread: Re: Lamplinc lockups and base address loss!
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home