[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 signals can be TOO strong!

Subject: Re: X10 signals can be TOO strong!
From: "Robert L Bass" <robertbass1@xxxxxxxxxxx>
Date: Fri, 15 Dec 2006 08:47:08 -0500
Newsgroups: comp.home.automation
References: <xFhfh.471684$QZ1.157389@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <6e5gh.30252$wP1.27181@xxxxxxxxxxxxxxxxxxxxxxxxxx> <qtdgh.203122$Fi1.110592@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <8ehgh.491908$QZ1.430735@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <4582b919.115898375@xxxxxxxxxxxxx>

"Dave Houston" wrote:
>
> The "strength" of the Insteon approach is the
> ubiquity (with adequate modules spaced
> appropriately) of the signal rather than its
> magnitude...

Hmm.  This sounds a lot like the strength of Z-Wave (except Z-Wave comes without the flickering).  :^)

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-866-1100
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>

References:
- X10 signals can be TOO strong!
  - From: Jeff Volp
- Re: X10 signals can be TOO strong!
  - From: Alan Vogel
- Re: X10 signals can be TOO strong!
  - From: Jeff Volp
- Re: X10 signals can be TOO strong!
  - From: Jeff Volp
- Re: X10 signals can be TOO strong!
  - From: Dave Houston

Prev by Message: Re: Dedicated Z-wave sites?
Next by Message: Re: X10 signals can be TOO strong!
Previous by thread: Re: X10 signals can be TOO strong!
Next by thread: Re: X10 signals can be TOO strong!
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home