[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 and Linux

Subject: Re: X10 and Linux
From: Charles Sullivan <cwsulliv@xxxxxxxxxxxx>
Date: Mon, 11 Dec 2006 01:30:56 GMT
Newsgroups: comp.home.automation
References: <iuydnSYkIf_sD-bYnZ2dnUVZ_ofinZ2d@xxxxxxxxxxxxx> <pan.2006.12.10.23.24.10.910081@xxxxxxxxxxxx> <457ca4bc.636770406@xxxxxxxxxxxxx>

On Mon, 11 Dec 2006 00:23:58 +0000, Dave Houston wrote:

> Charles Sullivan <cwsulliv@xxxxxxxxxxxx> wrote:
>
>>In any case, Heyu (http://www.heyu.org) can receive your PLC signals
>>with a CM11A and act on them, and can transmit RF with a CM17A.  (No RF
>>receiving yet.)
>
> But the CM17A cannot send the Ninja and other non-standard RF codes he wants
> to send.

This is true, but he knows that.  The CM11A/CM17A would just be a stopgap
until he's got a working CM15A or CM19A system.  He doesn't have a Ninja
yet anyway.

Regards,
Charles Sullivan

Follow-Ups:
- Re: X10 and Linux
  - From: Dave Houston

References:
- X10 and Linux
  - From: Gerald
- Re: X10 and Linux
  - From: Charles Sullivan
- Re: X10 and Linux
  - From: Dave Houston

Prev by Message: Re: Doggie doors
Next by Message: Re: XTB, reliablity, etc.
Previous by thread: Re: X10 and Linux
Next by thread: Re: X10 and Linux
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home