[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Automatic Wheelchair Turntable

Subject: Re: Automatic Wheelchair Turntable
From: Stu Alden <foo@xxxxxxx>
Date: Thu, 29 Sep 2005 20:38:32 -0400
Newsgroups: comp.home.automation, alt.support.wheelchairs
References: <_rydnR8CpccKQ6beRVn-hw@xxxxxxx> <433c1a1f.80501996@xxxxxxxxxxxxx>

Good source for lazy susan bearings, if appropriate:

http://www.leevalley.com/hardware/page.aspx?c=3D2&cat=3D3,44013&p=3D44042

In article <433c1a1f.80501996@xxxxxxxxxxxxx>, nobody@xxxxxxxxxxxx=20
says...
> I think your biggest problem will be to devise a thin turntable with a
> bearing that can handle the weight. A zillion (=B1 a few slew) marbles
> sandwiched between two flat metal surfaces might work.=20

Follow-Ups:
- Re: Automatic Wheelchair Turntable
  - From: Robert Green

References:
- Automatic Wheelchair Turntable
  - From: Robert Green
- Re: Automatic Wheelchair Turntable
  - From: Dave Houston

Prev by Message: Re: Low voltage wiring - NEC question
Next by Message: Re: CM15A and MisterHouse Module Starting Point
Previous by thread: Re: Automatic Wheelchair Turntable
Next by thread: Re: Automatic Wheelchair Turntable
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home