[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Insteon compatibility

Subject: Re: Insteon compatibility
From: Neil Cherry <njc@xxxxxxxxxxxxx>
Date: Tue, 13 Sep 2005 17:56:33 -0500
Newsgroups: comp.home.automation
References: <hla9i1h133caq9k1m5of9t24i6r9ehkev7@xxxxxxx> <slrndidof8.1dq.njc@xxxxxxxxxxxxx> <4326e500.4925418@xxxxxxxxxxxxx>

On Tue, 13 Sep 2005 14:50:44 GMT, Dave Houston wrote:

> It would be interesting to know the ESM1 X-10 signal strength in your
> computer room and garage.
>
> FWIW, my ESM1 shows a peak response at about 131kHz which is closer to the
> Insteon carrier than to the X-10 carrier.

I'll send you the data later, I'm working on it.

--
Linux Home Automation         Neil Cherry       ncherry@xxxxxxxxxxx
http://home.comcast.net/~ncherry/               (Text only)
http://hcs.sourceforge.net/                     (HCS II)
http://linuxha.blogspot.com/                    My HA Blog

References:
- Insteon compatibility
  - From: Ward Abbott
- Re: Insteon compatibility
  - From: Neil Cherry
- Re: Insteon compatibility
  - From: Dave Houston

Prev by Message: Re: Use of Audio Matrix Mixers in Home Automation
Next by Message: Re: Ir signals via X10
Previous by thread: Re: Insteon compatibility
Next by thread: Re: Insteon compatibility
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home