[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Trying to work with a CM11A under Linux

Subject: Re: Trying to work with a CM11A under Linux
From: Anthony Toft <toftat@xxxxxxxxxx>
Date: Thu, 28 Jul 2005 00:11:10 GMT
Newsgroups: comp.home.automation
References: <pan.2005.07.23.00.40.21.636557@xxxxxxxxxx> <42e19947.54186490@xxxxxxxxxxxxx>

> You are misreading the documentation. 0xa5 is requesting that you reset the
> RTC. You can send 0x9b alone or followed by the 7 bytes of RTC data as
> defined in section 8 of the document.

This is exactly what the problem is, now I have to make my appliance
module respond to the On and Off commands, the lamp module is workin glike
a champ.

Follow-Ups:
- Re: Trying to work with a CM11A under Linux
  - From: Dave Houston

References:
- Trying to work with a CM11A under Linux
  - From: Anthony Toft
- Re: Trying to work with a CM11A under Linux
  - From: Dave Houston

Prev by Message: Re: Software feature set for automation
Next by Message: Re: Insteon Review
Previous by thread: Re: Trying to work with a CM11A under Linux
Next by thread: Re: Trying to work with a CM11A under Linux
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home