Re: Insteon Test Report

[nobody@xxxxxxxxxxxx (Dave Houston)]

Bruce,

Any X-10 meter (e.g. ESM1) should report the Insteon signal as noise. You
can use it as a measure of signal strength.

Is the bathroom outlet GFI?

"BruceR" <br@xxxxxxxxxxxxxxxx> wrote:

>I've run my first test with an Insteon ICON switch and controller with
>disappointing results.  I installed the repeaters per the instructions
>and one ICON In Wall On/Off (2876S) switch that controls a porch light.
>I linked that switch to an Insteon Tabletop Controller and verified that
>it works from several outlets. The real test was to see if it worked
>from my bathroom where I could never control the X10 switch that was in
>place prior to the Insteon.  I plugged the controller in, pressed the
>button and... No Joy.
>
>Next step is to call them and discuss the result to see if they have any
>suggestions. Stay tuned.
>
>
>