[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Burnt Spot on Mini Controller

Subject: Burnt Spot on Mini Controller
From: dicko <drwho@xxxxxxxxxxxxxxxxxx>
Date: Wed, 03 Aug 2005 16:27:51 -0500
Newsgroups: comp.home.automation

Has anyone figured out how to keep the burnt/discolored/brown spot
from appearing on the X10 Mini Controller escutcheon. It has appeared
on every one I own.

I assume its the zener diode located under that spot thats getting hot
but has anyone replaced it with a bigger one or relocated it?

what part number? How did you do it?



Here's a pic.
http://users.rcn.com/dmagerl/202_0298-01.jpg

Follow-Ups:
- Re: Burnt Spot on Mini Controller
  - From: Andrew Gabriel
- Re: Burnt Spot on Mini Controller
  - From: Robert Green
- Re: Burnt Spot on Mini Controller
  - From: AZ Woody
- Re: Burnt Spot on Mini Controller
  - From: ajajaj
- Re: Burnt Spot on Mini Controller
  - From: Robert Green

Prev by Message: Whole house fan
Next by Message: Re: CM11A hangup: Any better products?
Previous by thread: HAI Command line
Next by thread: Re: Burnt Spot on Mini Controller
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home