[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Replacing Radionics with Vista 20P

Subject: Re: Replacing Radionics with Vista 20P
From: "Christopher Glaeser" <cdg@xxxxxxxxxxxxx>
Date: Thu, 20 Jan 2011 23:18:31 -0800
Newsgroups: alt.security.alarms
References: <Sfidnd74T6yxtaTQnZ2dnUVZ5hydnZ2d@xxxxxxxxxxxx>

I found the EOLRs.  There is a small faceplate below the old Radionics, so I
opened it and found a rats nest where all the wires come together.  As best
I can tell, the zones with multiple sensors are wired in parallel just below
the panel, and the 1K EOLR is also added just below the panel.  Doesn't this
defeat the purpose of an EOLR?  Isn't this really just a BOLR?  Also, if an
EOLR is at the panel for a fire zone, is this to CA code?

Best,
Christopher

Follow-Ups:
- Re: Replacing Radionics with Vista 20P
  - From: Jim Rojas
- Re: Replacing Radionics with Vista 20P
  - From: JoeRaisin
- Re: Replacing Radionics with Vista 20P
  - From: Jim Rojas

References:
- Replacing Radionics with Vista 20P
  - From: Christopher Glaeser

Prev by Message: Re: 7412 Programming
Next by Message: Re: Here you go housing starts in the dumper
Previous by thread: Replacing Radionics with Vista 20P
Next by thread: Re: Replacing Radionics with Vista 20P
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home