Re: LYNXR chime reminder

["Bob La Londe" <nospam@xxxxxxxxx>]

"Jim" <alarminex@xxxxxxx> wrote in message news:741ca2a1-bca0-4c32-9a6d-

>> I guess you could use an X-10 relay module to trip a 60 minute timer
>> relay
>> to activate a chime or chime tone piezo. �So... yeah I guess you could do
>> it, but its not worth it in most cases. �Or rather most people won't pay
>> for
>> the time and materials to do it.-
>
> It's not a big deal. Just get an Altronix delay timer and set it to
> trip 20 minutes after the door opens to cause the door to close. Or.
> use the timer to ring a sounder after 20 minutes. Depends what you
> want. If you're afraid you'll leave the door open when you go out, use
> the first method. If you just want to be notified when you're home,
> use the second method. Or use two timers ..... one to ring a sounder
> for 20 minutes and another to close the door after 30 minutes. If you
> have a Napco panel you can use the timers in the programing to do the
> same thing.

Run that last bit by me again.  I install almost exclusively Napco panels
and I do not get that bit.