Re: Ademco 15p and AD-2001 Dialer

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

Will that seize the phone line for 10 minutes??

Just asking...cause I'd never install on of those...curious.

--
**Crash Gordon**







"Robert L Bass" <Sales@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:fPednff4oYEpCpbXnZ2dnUVZ_uidnZ2d@xxxxxxxxxxxxxxx
> "mleuck" <m.leuck@xxxxxxxxx> wrote in message
> news:2cd0a464-ccfd-4f11-bde8-3fda3ea7f1a3@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>
>> 10 minutes eh? He might want to check programming of the dialer first
>> don't you think?
>>
>> Maybe Step #7 might be a good place to start
>
> That would be fine if momentary triggering was the best option.  I prefer
> maintained trigger because it allows the user to stop the dialer by
> disarming the panel with no further action required.  With momentary
> triggering, if even the user disarms the panel the dialer will run its
> course, sending unnecessary notifications.  Thus, the best choice (IMO) is
> to set the relay for about 10 minutes.  The dialer will typically finish
> its run in less time than that if it isn't stopped by disarming or by
> someone pressing 1-#-1-#.
>
> I've sold thousands of these dialers over the years.  They work well
> enough, though they're are not as secure as digital monitoring.
>
> --
>
> Regards,
> Robert L Bass
>
> ==============================>
> Bass Home Electronics
> DIY Alarm and Home Automation Store
> http://www.bassburglaralarms.com
> Sales & Service 941-870-2310
> Fax 941-870-3252
> ==============================>