Re: Changing User Access Code on Ademco Vista 20P

[mleuck <m.leuck@xxxxxxxxx>]

On Aug 5, 2:24=A0am, CH=AEIS <s...@xxxxx> wrote:
> "mleuck" wrote...
>
> > > If user 3 is the master code, which it may or may not be on a Vista 2=
0
> > > (not
> > > my specialty), you will need to enter the "master/installer code, 8, =
03,
> > > new
> > > code" twice in a row.
>
> > User code 2 is the system master code, 3 is partition 1 master code
>
> This is one area where even a DSC Maxsys is easier to work with...
> You need that code to be a master code? =A0Done.
> You need this code to be able to access only partitions 1, 4, 7 and 8? =
=A0No
> problem.
> You'd like me to program those now at the keypad instead of getting one o=
f
> the alpha keypads, ladder, etc. out of the van; wiring it to your panel;
> getting it addressed; then programming? =A0No problem.

Spend 40 to 45 minutes uploading the Maxsys? check! :)