Re: Vista 20 and IR motion problem

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

That's because the idiot didn't leave a service loop in the wall. But you
could probably move the PIR up or down a few inches and gain some wire
length.



--
**Crash Gordon**







<rickm@xxxxxxxxxxxxxx> wrote in message
news:a2a1fd80-bd10-409d-a278-274a0e8f000e@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> First, Thank you very much to the individuals that were actually
> interested in helping find and isolate the problem.
> I very much apppreciated your suggestions!
>
> The problem was an intermittent short between the power wire and one
> of the signal wires behind the wall.
> This cable cannot be replaced due to the location so I will either
> need to relocate the sensor or go to a wireless
> PIR.    Im sure some of you cant wait for me to try to install a
> wireless unit!  :^)
>
>