[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Can't address pull stationsight 5808 on Silent Knight panel.

Subject: Re: Can't address pull stationsight 5808 on Silent Knight panel.
From: Frank Olson <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 21 Mar 2008 17:47:37 GMT
Newsgroups: alt.security.alarms
References: <a6846bb1-7840-4f21-bd67-ef976bee2ca7@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

paul@xxxxxxxxxxxxx wrote:
> Can't address pull stationsight 5808 on silent Knight panel.
>
> Boy, am I frustrated!!..    Manual says just hook unit to 2 terminals
> named SLC program,  follow menu instructions and the unit is
> programmed.  I keep getting "connecting to device" but it never does!!
>
> What am I doing wrong?
>
> I have the correct +on SLC on panel and SLC on Unit.
> I have the pull station address set for 1.
>
> Any suggestions for what I can do?
>
> PS  Silent Knight tech support closed for Easter today.   Thanks


What's the model number of the pull station?  Are there any other
devices with the same address setting?  Have you observed the correct
polarity and are you getting voltage at the pull station terminals?

References:
- Can't address pull stationsight 5808 on Silent Knight panel.
  - From: paul@xxxxxxxxxxxxx

Prev by Message: Re: Changing the chime on a Scantronic SP750
Next by Message: Re: Need Advices
Previous by thread: Can't address pull stationsight 5808 on Silent Knight panel.
Next by thread: Re: Can't address pull stationsight 5808 on Silent Knight panel.
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home