Re: Addin RP3-DGTL keypad to Napco 816

["Bob La Londe" <nospam@xxxxxxxxx>]

go into the keypad programming area and set each additional keypad to be in
the area where you want it... ie area 1.


"Total nerd" <geekboy0001@xxxxxxxxx> wrote in message
news:f38db969-0c45-4dd5-bfff-b3117fbd9122@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have access to the PC loader if that's what you mean.  I know how to
add/remove devices, configure zones, etc... I've just never added a
keypad.

On Jun 18, 7:32 pm, "Russell Brill" <russwbr...@xxxxxxxxxxxxx> wrote:
> Nope......... The P816 must be configured to accept the second
> keypad......
> You'll need access to Installer Level programming in the P816 to enable
> the
> second keypad.....
>
> "Total nerd" <geekboy0...@xxxxxxxxx> wrote in message
>
> news:5baf8791-adab-4d5a-a548-24d3a248de2f@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
>
>
> >I want to add a second RP3-DGTL keypad to a Napco 816 panel. All I
> > have to do is tie it into the 4-line bus and set the jumpers in the
> > back of the keypad to the second pad? That's it?
> > Thanks!- Hide quoted text -
>
> - Show quoted text -