[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Trick to drilling a larger hole without damaging wiring

Subject: Re: Trick to drilling a larger hole without damaging wiring
From: "Robert L Bass" <Sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Thu, 24 Jul 2008 17:47:29 -0400
Newsgroups: alt.security.alarms
References: <085da910-ebf5-4ddc-ad1c-12a2870bc8e5@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <9d5b0fd5-10ca-4b2e-86cf-c81013a34f1c@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <yBJhk.6217$w93.3360@xxxxxxxxxxxxxxxxxxxxxx>

"Bob Worthy" wrote:
>
> If it is not on
> center, a larger hole could be to close to the edge of the door. Take a good
> look at things before you start drilling anything.

Good point about the magnet (the jamb side usually has a little more room).
If the magnet is too far off center, fill the hole with "Plastic Wood" (Home
Depot or any hardware store).  After it sets up drill as usual.

--

Regards,
Robert L Bass

==============================>
Bass Home Electronics
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
Sales & Tech Support 941-925-8650
Customer Service 941-870-2310
Fax 941-870-3252
==============================>

References:
- Trick to drilling a larger hole without damaging wiring
  - From: jawdoc
- Re: Trick to drilling a larger hole without damaging wiring
  - From: nmarkowitz
- Re: Trick to drilling a larger hole without damaging wiring
  - From: Bob Worthy

Prev by Message: Re: Kill my phone line?
Next by Message: Re: Brinks Alarms: Beware of the Fuel Surcharge Tax
Previous by thread: Re: Trick to drilling a larger hole without damaging wiring
Next by thread: Re: Trick to drilling a larger hole without damaging wiring
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home