[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: ADT Focus 32 - No Codes need help!!
G. Morgan wrote:
> tvangle@xxxxxxxxx wrote:
>
>> Does anyone know a way I can get to the master code or another way to
>> reset the system?
>
> Power system down
>
> Connect wire from zone 1 to PGM 1
>
> Power up, wait 10 seconds.
>
> If the relay clicks now - it's locked out. Else, It's defaulted to factory
> presets (power down, remove jumper).
>
> Now you have to reprogram the whole thing from scratch.
>
> Do not perform the above unless you're sure you can reprogram the system
> yourself, I can guarantee no one here is going to hold your hand through the
> whole process.
>
Ummm... Graham... He states that he heard the relay's "click" on
powerup. That means the panels locked. ADT probably "owns" it. He
should contact ADT and go from there.
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home