[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: NX8E keyswitch



On 1 =C1=FD=E3, 18:36, Bob <s...@xxxxxx> wrote:
> Proguard Security wrote:
> > At one of my NX8E installations i added a keyswitch at zone 21 (on expa=
nders
> > Z13) and i programmed it as momentary keyswitch (11). I connect the NC-=
C
> > relay output from the wireless receiver but nothing happens... Nor arm-=
nor
> > disarm... :-( Am i missing something??
>
> > Thanks in adnavce...
> > Spyros - Thessaloniki - Greece
>
> r u using resistor?

I've got only one partition. Z9-Z16 with zone double and Z17-Z24 with
expander. Yes, i use 3.3k resistors at expander's zones including Z21
(keyswitch zone).


alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home