[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: tech man panel unlocking

Subject: Re: tech man panel unlocking
From: "alarman" <thatsallfolksl@xxxxxxxxx>
Date: Mon, 22 Oct 2007 13:35:16 -0700
Newsgroups: alt.security.alarms
References: <13hiu6pkgsa5e09@xxxxxxxxxxxxxxxxxx> <47197af4$0$19583$4c368faf@xxxxxxxxxxxxxx> <471cb7c8$0$26377$88260bb3@xxxxxxxxxxxxxxxxx>

> I've since written off the board as lost, but have discovered a way to
> default NAPCO panels.  Change the EPROM and then let the processor
> re-flash the default code into the new EPROM.  This seems to work
> very well. Haven't tried with any other manufacturer. New EPROMS cost
> about $5.00 and can be found on eBay. One needs skill in PC board
> repair and this should not be attempted without the proper tools.

Wouldn't it be easier and safer to just replace the board?
--
js

- The bigger they are, the harder they fall.
( Also, the harder they bite, punch, and kick.)

Follow-Ups:
- Re: tech man panel unlocking
  - From: Mark Leuck

References:
- tech man panel unlocking
  - From: Dick Seed
- Re: tech man panel unlocking
  - From: Jim Rojas
- Re: tech man panel unlocking
  - From: TeraNews

Prev by Message: Re: SIA, Contact ID, 4/2, 3/1
Next by Message: Re: What's a Brinks 4000?
Previous by thread: Re: tech man panel unlocking
Next by thread: Re: tech man panel unlocking
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home