Re: Looking of a door access system

["Roland Moore" <roland@xxxxxxxxxxxx>]

>PXL500 from Keri System.

I have never installed a Keri System, I have only worked on a few. The ones
I worked on looked like low end gear (all plastic control  housings) and had
lots of problems. I don't know if the problems were installer realted or not
(there were lots of com problems between computer and panels and outright
panel failures). If you use Keri what are the pluses you've found compared
to other manufacturers access control gear?
Here are some I am familiar with (trained on most) if you can find a like
fit and compare it to any of these:
Software House (iSTAR Pro)
AMAG (MDU and 2100)
Infographic Systems (GE) Sapphire Pro (ACU2)
Continental Instruments Access 3000 (Super 2)
Northern Computers - Honeywell (N 1000 II & NStar)
Kantech (KT-200)
CEM (All)
Bosch (Access Easy)
Brivo (3400 & 5000)
KeySacn (All Panels)
Card Key (all - up to CK 720)

Keri doesn't seem to have a big footprint in this area. I never get to see
the gear before someone else puts thir paws on it, so I have never had a
fair look at it.

"ABLE_1" <royboynospam@xxxxxxxxxxxxx> wrote in message
news:VrGdncteb8UjTprbnZ2dnUVZ_oOknZ2d@xxxxxxxxxxxxxx
> Thanks to those that have replied.  I now have some new info and
> parameters to work with.
>
> It seems that the IEI ProxPad Plus can change the 9-5 default auto-unlock
> function thru the software only.  Thru the keypad is not an option for
> this function.
>
> However because of some new parameters being placed on this project by the
> customer I may have to go to a full Access Control system such as the
> PXL500 from Keri System.
>
> Again thanks for all the input.
>
> Have a good day.
>
> Les
>
>
>
> "ABLE_1" <royboynospam@xxxxxxxxxxxxx> wrote in message
> news:ac6dnQSyOvm8oZnbnZ2dnUVZ_hGdnZ2d@xxxxxxxxxxxxxx
>> Hello all,
>>
>> I have a project that requires a free standing single door card access
>> system.  My one choice is the IEI ProxPad Plus however it has some
>> shortfalls and will not do all desired.
>>
>> Here is what I am looking for and was wondering if there is a mfg or
>> model that can do it all.
>>
>> Single Door System maybe expandable but not required.
>>
>> Program and Add/Delete cards thru keypad without the use of a PC
>>
>> Can connect PC if desired
>>
>> 100 plus cards capacity
>>
>> Time schedule to unlock door on flexible schedule M-F 8-5
>>
>> New DST schedule or flexible
>>
>> Remote mount reader if desired
>>
>> Anyone know what system may meet the above requirements???
>>
>> TIA
>>
>> Les
>>
>>
>
>