Re: XP400 Keyswitch?

["Proguard Security" <proguard@xxxxxxxxxxxxxxx>]

Yap!

Finally i test it on the lab and it works great. Zone 4 (3.9K) and 26-1
makes the Xp400 arming and disarming.
Thanks boys for the assistance!

Ï "Robert L Bass" <no-sales-spam@bassburglaralarms> Ýãñáøå óôï ìÞíõìá
news:SMSdnW-q2qhIXJjbnZ2dnUVZ_h2pnZ2d@xxxxxxxxxxxxxx
>
>> Sure you can, zone 4 can be set up for keyswitch and enable it by turning
>> on
>> light 1 in section 26
>
> Thanks.  On further inspection, I find the following in the installation
> manual:
>
> "Arming/Disarming with a Keyswitch - The system can be armed/disarmed by
> using a momentary Keyswitch wired to Zone 4. Program Keyfob/Keyswitch
> Chirp [23-4] for an audible indication of system arming and disarming..."
>
> and
>
> "[26]Miscellaneous Features 2 - (1) Momentary Keyswitch Arming -
> Typically, connect a normally-open Keyswitch across the zone AND its 3.3K
> zone-doubling resistor."
>
> The latter is in the programming area and confirms Mr. Leuck's post.  I
> never installed any of their Express series panels.  Our standards were
> the P9600, P3200 and the Magnum 3000.
>
> --
>
> Regards,
> Robert L Bass
>
> =============================>
> Bass Home Electronics
> 941-925-8650
> 4883 Fallcrest Circle
> Sarasota · Florida · 34233
> http://www.bassburglaralarms.com
> =============================>
>