Re: XP400 Keyswitch?

["Robert L Bass" <no-sales-spam@bassburglaralarms>]

> Sure you can, zone 4 can be set up for keyswitch and enable it by turning on
> light 1 in section 26

Thanks.  On further inspection, I find the following in the installation manual:

"Arming/Disarming with a Keyswitch - The system can be armed/disarmed by using a momentary Keyswitch wired to Zone 4. Program
Keyfob/Keyswitch Chirp [23-4] for an audible indication of system arming and disarming..."

and

"[26]Miscellaneous Features 2 - (1) Momentary Keyswitch Arming - Typically, connect a normally-open Keyswitch across the zone AND
its 3.3K zone-doubling resistor."

The latter is in the programming area and confirms Mr. Leuck's post.  I never installed any of their Express series panels.  Our
standards were the P9600, P3200 and the Magnum 3000.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>