[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Oil Refinery
> It may help drive home the seriousness of
> why you're insisting on the more expensive
> wire, rather than just as an up-sell, and
> cause the customer to rethink cheaping
> out (not likely, but it's there).
>
> It also gives you a little protection from the
> CUSTOMER, when the inspector comes
> back and says, "Nope, this wiring won't
> pass, it's not plenum-rated" and the customer
> either hits you with "Why didn't you tell me?"
> and/or wants to be difficult when you charge
> him the materials and labour to completely
> remove and redo all the wiring you've done
> already, ON TOP OF the original install.
The best alternative is to simply state up front
why a particular job requires plenum cable. If
he balks, walk away. You don't need that
headache.
Besides having to deal with an angry customer
later, by installing the wrong cable you'll make
the inspector think you're dumb. In future every
time you call that AHJ for an inspection you're
going to get the "fine toothed comb" treatment.
--
Regards,
Robert L Bass
=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home