[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Ademco 998PI - detects motion but no alarm

Subject: Re: Ademco 998PI - detects motion but no alarm
From: "Mark Leuck" <m..leuck@xxxxxxxxx>
Date: Mon, 2 Jul 2007 16:57:26 -0500
Newsgroups: alt.security.alarms
References: <1183350873.204732.285980@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <46888acf$0$504$815e3792@xxxxxxxxxxxxxx> <1183385894.487320.278800@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <46895f70$0$3576$815e3792@xxxxxxxxxxxxxx>

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:46895f70$0$3576$815e3792@xxxxxxxxxxxxxxxxx
> Yes...you'll need to program that motion detector into the system on
> whatever zone you wired it to in the panel. Yes...installer manual and
> installer code and keypad that can get into zone programming (the cheap
> keypads can only program part of the system, not the zones)... 6139 or
6150
> (i think).

6160 and the 6164

Follow-Ups:
- Re: Ademco 998PI - detects motion but no alarm
  - From: Crash Gordon

References:
- Ademco 998PI - detects motion but no alarm
  - From: SmithRan
- Re: Ademco 998PI - detects motion but no alarm
  - From: Crash Gordon
- Re: Ademco 998PI - detects motion but no alarm
  - From: SmithRan
- Re: Ademco 998PI - detects motion but no alarm
  - From: Crash Gordon

Prev by Message: Re: Ademco Vista-10SE Chime does not chime
Next by Message: Re: Ademco 998PI - detects motion but no alarm
Previous by thread: Re: Ademco 998PI - detects motion but no alarm
Next by thread: Re: Ademco 998PI - detects motion but no alarm
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home