[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Ademco 998PI - detects motion but no alarm

Subject: Re: Ademco 998PI - detects motion but no alarm
From: Frank Olson <Use-the-email-links@xxxxxxxxxxxxxxxxxxxxxx>
Date: Mon, 02 Jul 2007 14:45:31 GMT
Newsgroups: alt.security.alarms
References: <1183350873.204732.285980@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

SmithRan wrote:
> I have installed a Ademco 998PI/998EXPI unit. it detects motion fine
> (LED glows on any motion) - but does not trigger an alarm.. is there
> some pet sensitivity threshold I can adjust? Or something else which
> is causing the problem?  When I open doors the alarm works fine. I
> have a Ademco Vista-10SE unit.
>


Sounds like you have a zone configuration problem.  Like...  RTFM (Read
The Freekin' Manual)!  :-)

References:
- Ademco 998PI - detects motion but no alarm
  - From: SmithRan

Prev by Message: Re: Ademco 998PI - detects motion but no alarm
Next by Message: Re: Hey Mark
Previous by thread: Re: Ademco 998PI - detects motion but no alarm
Next by thread: Re: Ademco 998PI - detects motion but no alarm
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home