Re: Dual Tech motion detectors with dual relay outputs ?

["BIG NIGE" <no.way@jose>]

Have a look at this UK Detector
 http://www.pyronix.com/tmd15/TMD/literature/TMDLeafletWeb.pdf

Marc_F_Hult <MFHult@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:cl6hc39pp23d9jph7pnup5tvpkh1qsqp5k@xxxxxxxxxx
>
> I'm looking for PIR + microwave (dual tech) motion detectors that separate
> have outputs for both the PIR and microwave detectors. It would be OK for
> the microwave not to be energized until after the PIR detects motion (in
> other words, the two outputs could be PIR and (PIR+uWave) rather than PIR
> and uWave).
>
> My application is for using the same device for both lighting path
> automation (which needs to be fast but which for false detections are not
a
> major problem) and intrusion security (for which immunity from false
> detection is important).
>
> The closest I've found are some Rokonet iWISE detectors
>
> http://www.riscogroup.com/Products.aspx?subcatid=152&id=12
>
> that have "Green Line for disabling the MW when the building is occupied"
> and  separate LEDs for walk-testing that might allow me to solder on
> comparators to close relays when the LEDs light. I'd prefer something
> pre-built though.  Two separate NO or NC relays would be ideal.
>
> Any suggestions ?
>
> TIA ... Marc
> Marc_F_Hult
> www.ECOntrol.org