[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: AC Smoke interconnection

Subject: Re: AC Smoke interconnection
From: "Robert L Bass" <RobertLBass@xxxxxxxxxxx>
Date: Wed, 08 Aug 2007 18:00:02 GMT
Newsgroups: alt.security.alarms
References: <Xu5ui.4862$QP5.1198@xxxxxxxxxxxxxxxxxxxxxx> <a1mui.2426$VW5.462@xxxxxxxxxxxxxxxxxxxxxx>

> The only one I know of, that is a complete UL
> approved unit, is the Gentex 9120F 120 vac/9vdc
> Photoelectric smoke alarm with piezo. It has a
> pair of wires for an external alarm system.

Be careful.  The Gentex 9000 series smoke alarms
are NOT LISTED for use with an alarm control panel.
The system, if these were connected, would not
comply with applicable UL and NFPA standards.
If the inspector finds it he may refuse to issue a CO
until the components are replaced and correct
wiring is installed.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>

Follow-Ups:
- Re: AC Smoke interconnection
  - From: Frank Olson
- Re: AC Smoke interconnection
  - From: Norm Mugford

References:
- AC Smoke interconnection
  - From: Kendog
- Re: AC Smoke interconnection
  - From: Norm Mugford

Prev by Message: Make Over $120,000 Online Every Month without Owning a Website or A Product
Next by Message: Re: Andersen 400 Series Security contacts
Previous by thread: Re: AC Smoke interconnection
Next by thread: Re: AC Smoke interconnection
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home